Police Siren 200w PA Microphone 12v 8 Tone Sounds Emergency Fire

Description

Assured Performance Police Siren 200w
7 Siren Tones – 1 Horn Tone – PA

Check Out Our Demo Video Below

CLICK HERE TO WATCH ON YOUTUBE
This video does not do justice to just how loud 200w siren this is.
The Police Siren 200w can be mounted in engine compartment.
This Siren PA is mind blasting loud and will really alert people of your presence!!
It has a simple wiring design and can literally be installed in just minutes.
Super Easy 12v Install
This Police Siren 200w will work on Cars, Trucks, & SUVs,
It is awesome for UTV & Golfcarts.

This Assured Performance Police Siren 200w watt is a 8 tone siren and PA system that is super easy to install.
This police siren speaker is weather proof and can be mounted in in a location that gets wet.
The PA microphone assembly & control box is NOT weather proof and needs to be mounted in a dry location.
This emergency siren kit only draws 6 amps so it can be installed on just about any 12v DC system.
We sell many of these Police / Fire Sirens to volunteer firefighters for their vehicles warning system.
If you are looking for a siren to get the attention of others, without spending a fortune, this is your answer.

This Assured Performance 200w siren is perfect for emergency responders
This Siren kit may be illegal to use in your area
Check your local laws before messing up your buddies.

ACHRYH-6200 Siren Specs:

Part# ACHRYH-6200
Required Voltage: 12
200 Watts
Amperage: 6A
Voice Coil Impedance: 4 Ohm
Tone: 8 Sounds (Siren x7 / Horn x1)
Speaker Dimensions: 5.2”H x 8.0”W x 6.41”D (see pic. above)
Control Box Dimensions: 1.5”H x 5.5”W x 6.5”D
Speaker Cone Material: Black ABS

Includes:
High Quality Microphone Handle.
Momentary Air Horn & Siren Paddle Switch.
Dual toggle for accessories or emergency lights.
On/Off Switch & Volume Control
Control Box Hanger Bracket
Wiring Harness
Inline Fuse/Holder
Mounting Hardware
Microphone Holder
Easy To Read Install instructions

Assured Performance 90 Day Warranty

How To Operate The Assured Performance Police Siren 100w Speaker.

This siren kit has a siren tone selector dial on the control box.  This selector dial allows you choose 1 of 7 siren tones.
There is also a momentary toggle switch for air horn and siren wail on the control box.
The control box has a fifth button that is momentary and is used to activate a air horn tone.
The Assured Performance ACHRYH-6200 control box also has 2 toggle switch that can be used to control emergency lighting or other accessories.
The included microphone handle  has a side button to activate the PA system.
This Police Siren 200w PA will automatically mute the sirens while the PA slide bar is being depressed.

Wiring The Assured Performance Police & Fire Siren 200w Speaker.

This Assured Performance police siren 200w kits is so simple to install.  The control box needs to be installed in a dry location inside the vehicle cabin.  The control box has plug harness with wire leads coming from the rear of the box.  There are two green leads that go to the speaker.  Our harness also has a black ground lead that you wire to negative on a battery or to a solid ground. The 4th lead on the control box is a red wire.  The red lead is positive that you need to wire to a 12v source. We do recommend that you wire to an ignition source to cut off the power supply vehicle is out of service.

*FREE SHIPPING!!!
*For Continental U.S. Shipments ONLY