Assured Performance Police Siren 100w
4 Siren Tones – 1 Horn Tone – PA
Check Out Our Demo Video Below
CLICK HERE TO WATCH ON YOUTUBE
This video does not do justice to just how loud 100w siren this is.
The Police Siren 100w can be mounted in engine compartment.
This Siren PA is mind blasting loud and will really alert people of your presence!!
It has a simple wiring design and can literally be installed in just minutes.
Super Easy 12v Install
This Police Siren 100w will work on Cars, Trucks, & SUVs,
It is awesome for UTV & Golfcarts.
This Assured Performance Police Siren 100w watt is a great 5 tone siren and PA system that is super easy to install.
This police siren speaker is weather proof and can be mounted in in a location that gets wet.
The PA microphone assembly is NOT weather proof and needs to be mounted in a dry location.
This emergency siren kit only draws 1.5amps so it can be installed on just about any 12vDC system.
We sell many of these Police / Fire Sirens to volunteer firefighters for their vehicles warning system.
If you are looking for a siren to get the attention of others, without spending a fortune, this is your answer.
This Siren kit is so fun, it may be illegal!
Check your local laws before messing up your buddies.
ACHRYH-5100 Siren Specs:
Required Voltage: 12
Voice Coil Impedance: 8 Ohm
Tone: 5 Sounds (Siren x4 / Horn x1)
Speaker Dimensions: 4.8”H x 7.3”W x 6.31”D (see pic. above)
Control Box Dimensions: 1.36”H x 4.5”W x 3.9”D
Speaker Cone Material: Black ABS
High Quality Microphone Handle
On/Off Switch & Volume Control
Easy To Read Install instructions
Assured Performance 90 Day Warranty
Do you want something a little louder?
CLICK HERE FOR 200w KIT
How To Operate The Assured Performance Police Siren 100w Speaker.
This siren kit has 5 buttons on the small control box.
Four of these buttons are used to activate the siren tones.
The control box has a fifth button that is momentary and is used to activate a air horn tone.
The included microphone handle has a side button to activate the PA system.
Police Siren 100w PA will mute the sirens while the PA slide bar is being depressed.
Wiring The Assured Performance Police & Fire Siren 100w Speaker.
This Assured Performance police siren 100w kits is so simple to install. The small control box needs to be installed in a dry location inside the vehicle cabin. The control box has 4 wires leads coming from the rear of the box. There are two green leads that go to the speaker. Our control box also has a black ground lead that you wire to negative on a battery or to a solid ground. The 4th lead on the control box is a red wire. The red lead is positive that you need to wire to a 12v source. We do recommend that you wire to an ignition source or use a toggle switch to cut off the power supply when not in use.
*For Continental U.S. Shipments ONLY